To clear all exisiting and old codes from a socket perform the following: * Whilst the socket is OFF hold down the on/off button on the front of the socket for about 3 seconds until the light flashes slowly. * Press and hold the ALL OFF button on th...

Remote Control Sockets with Nightlight (bought as one pack) There are 3 channels on the remote control unit. So if you wish to control each socket seperately then the answer is three. If you wish to control many sockets with one button then you can ...

This is caused by interference from other products using the same type of radio frequency. Occasionally when the socket is in learning mode it will pick up stray signals from other equipment (such as remote car keys) and learn these as well. The soluti...

The answer is yes. Set up your socket with the first remote controller in the normal way, then do the following: 1. Turn off the socket. 2. Press and HOLD down the button on the socket for 5 seconds. 3. Release the button, the light will flash slowl...

In an open space the distance will be over 20 metres. Through walls and ceilings the distance will be reduced. The actual distance will depend on the density of the walls, but in most standard houses the product will work through 1 or 2 walls quite easily...